본문 바로가기

COMPANY

Stop chasing the process engineering tools. ProEn is the best solution for the process engineering calculation.

  • Physical Properties: Organic Component, Inorganic Component
  • Hydraulic: Pump Hydraulic, Compressor Hydraulic
  • Stationary Equipment: Tank, Vessel, Cooling Tower, Column, Heat Exchanger, Fired Heater, Air Cooler, Flare Stack, Vent Stack
  • Rotating Equipment: Pump, Compressor, Turbine
  • Instrument: Control Valve, PSV
  • Line: Liquid Line, Vapor Line, Two Phase Line, Line Heat Loss, Line Heat Gain, Line Purge
  • Others: Unit Conversion, Pipe Rating Chart, Material Selection
In addition, your existing excel/execution files have been easily connected to the ProEn with one click.
Do you want to know how to use the ProEn program. Please click the menu [ProEn Manual Movie Clip]

  • ProEn Main Page

    ProEn consists of 36 programs including pump and compressor hydraulic tool. Do click. You can get the data immediately.

  • Physical Properties Program

    ProEn provides the database for 1700 organics and inorganics material. You can calculate the physical properties for single or 20 material mixtures.

  • Tank Sizing Program

    There are several calculation options for tank sizing. You can calculate the tank sizing, nitrogen consumption, breather valve size and emergency vent size. Also, you can calculate tank heat loss and tank heat gain.

  • Ball Tank Sizing Program

    ProEn provides variety holding day base. You can calculate the ball tank size.

  • Vertical Vessel Sizing Program

    Vertical Vessels consists of Separator, Instrument Air Receiver and Vertical Knock-out Drum. You can calculate and optimize the vessel with variety calculation options.

  • Horizontal Vessel Sizing Program

    Horizontal Vessel consists of V/L, V/L/L, L/L Separator and Knock-out Drum. You can calculate and optimize the vessel with variety calculation options.

  • Pump Sizing Program

    If you input the pump suction and discharge data, you will obtain the useful results for pump data sheet.

  • Compressor / Turbine Program

    You can calculate the compressor stages, temperature, compression ratio, efficiency and power consumption automatically. Also calculated power can be used for turbine program.

  • Shell & Tube Heat Exchanger Program

    You can calculate the size of shell and tube side and obtain variety results. Also, this program got the flexibility due to variable change option.

  • Air Cooler Program

    You can calculate the size of air cooler and obtain variety results.

  • Fired Heater Program

    You can calculate the size of radiation section and convection section. Additionally, you can get the temperature profile and stack height.

  • Cooling Tower Program

    You can get all data for cooling tower after input the data - cooling water circulation flowrate, supply and return temperature and dry bulb and wet bulb temperature.

  • Column Program

    After extracting the physical properties, you can calculate the column size and the number of trays.

  • Line Sizing Program

    There are several hydraulic programs for liquid line, vapor line and two-phase line. ProEn provides the design criteria and neat user interface. Additionally, line heat loss, heat gain and purge calculation are also provided.

  • Control Valve Sizing Program

    This program basically provides control valve size, Cv and trim size. Also, the calculation is as the same quality as control valve vendor.

  • PSV Sizing Program

    There are a lot of information for PSV calculation. So, You may frequently use this program.

  • Flare Load Calculation Program

    You can calculate the flare load of fire case for vertical vessel and horizontal vessel.
    There are two calculation options - wet case for liquid and dry case for gas.

  • Flare Stack Program

    This program provides flare stack sizing and radiation study. You can obtain here the graphical results.

  • Vent Stack Program

    Dispersion is the important calculation point for vent stack. There are 10 intervals and shows the dispersion chart.

  • Pump / Compressor Hydraulic Program

    Engineer spent a lot of time for this pump hydraulic and compressor hydraulic. ProEn supplies the automatic hydraulic program. The loss time will be remarkably reduced and saved. This program is the best of the best.

  • Pipe Rating Program

    This program calculates and shows the limited pressure in accordance with design temperature. Material and pipe rating are needed for calculation.

  • Material Selection Program

    This program will help to decide the useful material in the process fluid. You can choose metal or non-metal for the selection of material.

  • Unit Conversion Program

    You can choose the engineering unit among 55 units. This program is the best tool against the other unit conversion tools.

  • Existing Program Connection and Execution

    And one last thing. Do you want to connect the existing excel file on the ProEn program. Connect and click. That's all. You can open the excel file immediately. All file including execution file can be connected and opened.
What you see is What you get. That is ProEn.